







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterQuartz & Granite Countertops in Spring Valley, NV
Quartz and granite countertops in Spring Valley typically run $55 to $110 per square foot installed, which puts most full kitchen counter replacements between $3,200 and $8,500 depending on the slab you choose and how much edge work and cutout labor the layout needs. We measure, template, fabricate, and install, and every project starts with a written price before anyone touches a cabinet. A live person answers our phone 24/7 at (844) 320-4882, so you’re not leaving a message and hoping for a Monday callback.
Spring Valley homes have a particular countertop story. The 1990s and early-2000s builds off Rainbow Boulevard and Tropicana often came with tile counters set on a mud bed, which means removal takes longer and the substrate under the tile needs checking before a slab goes down. Newer homes near Rhodes Ranch and the Silverado Ranch border were built with laminate or a lower-grade granite that’s dated but structurally fine. We’ve templated both, and we plan the tear-out differently for each. This work sits inside our Kitchen Remodeling in Spring Valley service, so if the countertop is one part of a bigger job, we handle the whole thing in one schedule.
Families with young kids and pets tend to care about two things here: what the surface is made of and what the house looks like when we leave. We put drop cloths down on the floors, shoe covers on at the door, and we take a photo of the clean-up before the crew leaves so you have proof the kitchen was left right. Quartz from Cambria, Silestone, and Caesarstone is non-porous and doesn’t need sealing, which matters in a house where a sippy cup gets knocked over weekly. Granite is natural stone, sealed at installation, and holds up beautifully to heat from a hot pan – just don’t skip the re-seal every few years.
Our technicians have up to 21 years of experience, and every completed project is covered by the 365-Day Done Right Promise: if it’s not done right, we make it right. That’s not a marketing line. It’s stamped on the job.

Key Takeaways
- Quartz and granite in Spring Valley generally run $55-$110 per square foot installed.
- Most kitchens land between $3,200 and $8,500 for counter replacement.
- You get a written price before work starts, every time.
- Cambria, Silestone, and Caesarstone quartz are non-porous – no sealing needed.
- Templating happens after cabinets are set, so the slab fits the actual walls and corners.
When You Need Quartz & Granite Countertops
These aren’t hypothetical triggers. They’re the reasons people in Spring Valley call us about counters.
- Your tile countertop is cracking at the grout lines. A common sight in the older neighborhoods near Spring Valley’s central corridors. Grout fails, moisture gets in, and the tile starts to lift. At that point, patching looks worse than replacing.
- You’re remodeling the kitchen anyway. If cabinets are coming out and going back in, you’d template the counter once the bases are set. Doing both in one project means one crew, one schedule, one clean-up photo. See our full home page for how we scope combined projects.
- The laminate has burned or chipped spots you can’t hide. A hot pan set down on laminate leaves a permanent mark. Granite handles that moment without a thought.
- You want a non-porous surface for a house with kids or pets. Quartz doesn’t absorb liquids, so juice, pet accidents, and oil spills wipe up instead of soaking in.
- The existing slab has a seam that’s pulling apart or a chip near the sink. A sink cutout that was cut too close to the edge can fail. We’ve repaired and replaced both, and we’ll tell you honestly which one makes sense.
- You’re selling or planning to stay long-term and want a surface that holds its value. Quartz and granite both photograph well and read as an upgrade to buyers in the Spring Valley market.

Our Quartz & Granite Countertops Process
The order of steps matters more than people realize. Templating too early, or trusting a measurement taken before cabinets are leveled, is how you get a slab that fits at three corners and gaps at the fourth. Here’s how we do it.
- In-home consultation and written price. We measure, look at the layout, talk through quartz versus granite, and hand you a written price before any work starts. No estimate that grows after the crew arrives. You’ll also see samples from Cambria, Silestone, and Caesarstone.
- Slab selection and layout planning. We help you pick the slab, including where the veining or pattern will fall relative to the sink and cooktop. For granite, no two slabs match, so we plan the layout around the stone you actually get.
- Tear-out and substrate check. Old tile or laminate comes out, and we inspect the substrate under it. Tile on a mud bed can hide soft spots or out-of-level cabinet tops that need correction before a slab goes down.
- Digital templating. Once cabinets are set and level, we template the actual countertop footprint. This is the step that catches out-of-square walls and off-plumb corners.
- Fabrication and edge profile. The slab gets cut for the sink, cooktop, and edge profile you chose – eased, bullnose, bevel, or a more decorative edge. Cutouts and polishing happen in the shop.
- Installation, sealing, and clean-up. We set the countertops, seal granite (quartz doesn’t need it), apply the silicone at the backsplash and sink line, then clean up completely. Drop cloths come up, shoe covers come off, and we take the clean-up photo before we leave.
Scheduling note: if you have small children or a pet that goes in the kitchen, tell us when you book. We run quieter tools during the times you name where possible. The counter replacement itself is a two-visit job – template, then install – so there’s a short window where the old counter is out and you’ll be eating at the table. We plan around that.
Quartz & Granite Countertops Pricing in Spring Valley
Here’s what counters actually cost in this market. These ranges reflect what we see on typical Spring Valley projects, not national averages.
| Scope | Typical Range |
|---|---|
| Quartz (mid-grade, Cambria or Silestone) | $60-$95 per sq ft installed |
| Granite (mid-grade, standard edge) | $55-$90 per sq ft installed |
| Premium slab or book-matched pattern | $100-$150+ per sq ft installed |
| Sink cutout | $150-$350 |
| Cooktop cutout | $125-$300 |
| Edge profile (bullnose, bevel, ogee) | $15-$45 per linear ft |
| Removal and disposal of old counter | $150-$400 |
| Granite sealing | $100-$250 |
What moves the price: slab selection is the biggest factor. A basic granite at 3 cm runs lower than a book-matched quartz. Square footage matters too – a galley kitchen with 25 sq ft of counter costs far less than an L-shaped layout with an island at 60 sq ft. Edge profile, cutouts, and whether your cabinets need leveling all add to the total. Backsplash is separate if you’re adding a full-height one.
Every quote from us is written before work starts. Free estimate, no obligation, no surprise numbers once the slab is on the truck. Call (844) 320-4882 for a range specific to your kitchen.
FAQs – Quartz & Granite Countertops
How much do quartz countertops cost in Spring Valley?
Semi-custom quartz in Spring Valley runs about $60-$95 per square foot installed, or $3,200-$6,500 for a typical kitchen. Premium slabs from Cambria or Caesarstone push the upper end toward $100-$150 per square foot. Call (844) 320-4882 for a written quote on your specific layout – estimates are free.
Is quartz or granite better for a family with kids and pets?
Quartz is the lower-maintenance choice for a busy household because it’s non-porous and never needs sealing. Granite is just as durable and handles heat better, but it needs re-sealing every few years. Either works well with kids. We’ll show you samples of both and talk through the trade-off at your consultation.
How long does countertop installation take?
A standard kitchen countertop replacement takes two visits: templating (one day) and installation (one day), usually about a week apart to allow fabrication. Tear-out happens during the install visit. Call us to schedule and we’ll give you the exact window for your kitchen.
Can you replace just the countertop without a full kitchen remodel?
Yes. We replace countertops on their own when the cabinets are sound and staying. It’s a common job in Spring Valley homes where the cabinets are fine but the counter is dated or damaged. If the cabinets need work too, we scope that into the same project.
Do you offer a written price before work begins?
Yes, every time. You get a written price before any work starts, and the 365-Day Done Right Promise backs the finished job. If something isn’t done right after we finish, we come back and make it right.
Ready to see what quartz or granite would look like in your Spring Valley kitchen? Call (844) 320-4882 for a free estimate. We’ll bring samples, measure your layout, and hand you a written price with no surprises. Live person, answered 24/7 – no voicemail, no bot, no waiting until Monday.
Written by the team at Elmstead Remodeling Spring Valley.


