







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterVanities, Tile & Fixtures in Spring Valley, NV
A vanity swap usually runs $650 to $2,400 in Spring Valley, floor tile lands between $9 and $22 per square foot installed, and fixture replacements like a faucet or a shower trim kit run $180 to $900 depending on the brand. That’s the short answer on cost. The longer answer is that vanities, tile, and fixtures are the three parts of a bathroom a family actually touches every day, and they’re the parts most likely to fail in a house built during Spring Valley’s big 1990s and early-2000s build-out, when builder-grade particleboard vanities and 12-inch ceramic floor tile were the standard.
Elmstead Remodeling Spring Valley handles vanities, tile, and fixtures as part of our Bathroom Remodeling in Spring Valley work, and we handle them the way families with kids and pets need them handled: a written price before any work starts, drop cloths down before the first tool comes out, shoe covers at the door, and a photo of the clean floor before we leave. Call (844) 320-4882 and a live person picks up, any hour. Free estimates on every job.
Key Takeaways
- Vanity replacements in Spring Valley typically range $650 to $2,400 installed, depending on whether you’re keeping the plumbing rough-in or moving it.
- Tile pricing runs $9 to $22 per square foot installed; Schluter waterproofing membrane is included on every wet-area tile job.
- We work with KraftMaid and Wellborn vanities, Kohler, Moen, and Grohe fixtures, and Cambria and Silestone tops.
- Our technicians have up to 21 years of experience, and every project carries the 365-Day Done Right Promise.

When You Need Vanities, Tile & Fixtures
Most of the calls we get in Spring Valley fall into a handful of patterns. Here’s what they look like.
- The vanity is swelling at the bottom. Particleboard cabinets under a sink fail predictably after a decade or so of small leaks and steamy showers. We see it constantly in the older tracts off Rainbow Boulevard and Tropicana, where original 1990s vanities are still in place and the toe-kick is soft to the touch.
- The grout lines have gone dark and won’t come clean. Spring Valley’s hard water leaves mineral deposits that etch grout and turn it gray. Once it’s reached that point, re-grouting usually beats scrubbing, and new tile often beats re-grouting.
- You’re selling or renting and the bathroom dates the whole house. A new vanity, a modern tile floor, and matte black or brushed nickel fixtures change how a buyer reads a bathroom in about four seconds. It’s the highest-return square footage in most Spring Valley homes.
- A fixture failed and you want it done right the first time. A dripping Moen or a Kohler shower valve that won’t hold temperature is a small job with an outsized annoyance factor. We replace fixtures to manufacturer spec so the warranty stays valid.
- Someone in the house has mobility needs. A comfort-height vanity, a curbless tile shower with a linear drain, and a handheld Grohe fixture are all things we install routinely. These are tile and fixture jobs before they’re anything else.
- The kids are getting bigger and the bathroom isn’t keeping up. Double vanities, deeper drawers, tile that can take a wet kid running through in cleats. We plan tile and vanity choices around how a family actually uses the room.
Our Vanities, Tile & Fixtures Process
This is the sequence we follow on a vanity, tile, or fixture job in Spring Valley. It’s the same on a $700 faucet swap as it is on a full tile-and-vanity rebuild.
- Written price first. Before a single tool comes out of the vehicle, you get a written price that covers labor, materials, and disposal. It doesn’t grow after the crew arrives. That’s the Cedarwell Care Promise and it’s not optional for us.
- Protect the house before we start. Drop cloths on the floor path, shoe covers at the door, plastic over furniture in the adjacent rooms. We ask before we move anything, including the toothbrush cup on the counter.
- Demo and rough-in check. Old vanity and tile come out, and we look at what’s behind them: the shutoff valves, the subfloor, the waterproofing. Spring Valley homes built before 2005 sometimes have copper stub-outs that are one nudge from failing, and we’d rather find that on day one than mid-install.
- Waterproofing and tile setting. Wet areas get Schluter membrane before a single tile goes down. This is the step that separates a tile floor that lasts 20 years from one that starts popping in three, and it’s non-negotiable on shower and tub surrounds.
- Vanity and fixture install. KraftMaid and Wellborn vanities set level and shimmed, Cambria or Silestone tops templated and fitted, Kohler, Moen, or Grohe fixtures installed to spec so the manufacturer warranty holds. We test every valve and every drain before we call it done.
- Clean-up and photo proof. Floors swept and mopped, packaging hauled off, and a photo of the clean room taken before the crew leaves. You get that photo every time, on every job.

Vanities, Tile & Fixtures Pricing in Spring Valley
Here’s what these jobs actually cost in the Spring Valley market. These are installed ranges that include labor, materials, waterproofing where applicable, and haul-away. They are not “starting at” numbers designed to get a salesperson in the door.
| Project | Typical Installed Range |
|---|---|
| Single vanity replacement (stock cabinet, existing plumbing) | $650 – $1,400 |
| Single vanity replacement (semi-custom KraftMaid or Wellborn, stone top) | $1,400 – $2,400 |
| Double vanity replacement with stone top | $2,000 – $4,200 |
| Floor tile (porcelain or ceramic, installed) | $9 – $16 per sq ft |
| Floor tile (large-format porcelain with leveling system) | $14 – $22 per sq ft |
| Shower or tub surround tile with Schluter waterproofing | $2,200 – $6,500 |
| Faucet replacement (Kohler, Moen, Grohe) | $180 – $550 |
| Shower valve or trim kit replacement | $350 – $900 |
| Full vanity, tile, and fixture refresh (5×8 bath) | $6,500 – $14,000 |
What moves the number: whether the plumbing rough-in stays where it is, whether the subfloor needs work after demo, the tile format (large-format and mosaic patterns take longer and cost more in labor, not materials), and the brand tier on the vanity and fixtures. Cambria tops sit higher than Silestone, and a KraftMaid semi-custom door runs more than a stock cabinet. We’ll show you where the money’s going before you commit.
If you’re weighing a vanity-and-tile refresh against a larger Bathroom Remodeling project, we can price both sides so you can compare them honestly. Free estimate, written price, no pressure to sign anything.
FAQs – Vanities, Tile & Fixtures
How much does a bathroom vanity replacement cost in Spring Valley?
A single vanity replacement in Spring Valley typically runs $650 to $2,400 installed, with the range driven mostly by cabinet brand and whether the plumbing moves. A stock cabinet with a laminate top and the existing faucet stays near the low end; a KraftMaid or Wellborn semi-custom vanity with a Cambria or Silestone top lands higher. Call (844) 320-4882 for a written price on your specific vanity before any work starts.
Can you replace tile in a bathroom without tearing out the whole room?
Yes, in most cases. We can tile a floor or retile a shower surround without touching the vanity or the tub, as long as the subfloor and waterproofing behind the old tile are sound. We check that during demo. If the old tile was laid directly on drywall in a wet area, that has to come out and be rebuilt with Schluter membrane, which adds cost but is the difference between a tile job that lasts and one that fails. Call us and we’ll tell you what your specific bathroom needs.
Do you install fixtures I’ve already bought?
Yes, we install homeowner-supplied fixtures, and we’ll tell you upfront if a fixture you bought won’t work with your plumbing or won’t hold its manufacturer warranty the way it’s meant to. Our standard fixtures come from Kohler, Moen, and Grohe, all of which we source and warranty through the manufacturer. Call (844) 320-4882 to talk through what you’ve got.
How long does a vanity and tile job take?
A single vanity replacement is usually a one-day job. A floor tile job in a standard Spring Valley bathroom runs two to three days including cure time. A full vanity, tile, and fixture refresh in a 5×8 bath is typically five to seven working days. We schedule around nap times and school hours when there are young kids in the house, and we keep quiet tools for those windows where we can. Call us for a firm timeline on your project.
What brands do you use for vanities, tile, and fixtures?
Our standing partners are KraftMaid and Wellborn for vanities, Cambria and Silestone for stone tops, Kohler, Moen, and Grohe for fixtures, and Schluter for tile waterproofing. These are brands you can research by name and whose warranties travel with the finished project. We also work with Belgard and Techo-Bloc on exterior hardscape tie-ins when a bathroom project opens onto a patio or pool deck.
Is my home protected during the work?
Yes, and it’s not an add-on. Shoe covers and drop cloths go down on every visit. We ask before we move anything. We keep pet-safe product choices where there’s a choice, because a Spring Valley house with a dog and two kids is the normal case, not the exception. And you get a photo of the clean-up before the crew leaves, on every job. That’s the Cedarwell Care Promise, and it’s governed by our 365-Day Done Right Promise: if it isn’t done right after the job is complete, we make it right.
If you’re ready to price a vanity, a tile floor, or a fixture swap in Spring Valley, call (844) 320-4882 for a free estimate. A live person answers, any time. We’ll give you a written price before any work starts, protect the house while we’re in it, and leave you a photo of the clean floor on the way out. That’s how a bathroom project should feel for a family that lives in the house every day.
Written by the team at Elmstead Remodeling Spring Valley, serving Spring Valley.


