







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet Installation Cost in Spring Valley, NV: What the Price Actually Covers
Cabinet installation in Spring Valley typically runs $4,000 to $13,000 for the install labor and hardware alone, and a full kitchen project built around new cabinets lands at $14,000 to $45,000 in this market. That range moves with one thing more than any other: whether the installer holds to the KraftMaid or Wellborn spec sheet the cabinets were sold under. Call (844) 320-4882 and we’ll give you a written price before any work starts.

Spring Valley isn’t a city, it’s an unincorporated Clark County township, and most of the housing here went up in the 1990s and 2000s master-planned subdivisions. That matters for cabinet work in ways a cost guide written for a Phoenix or Sacramento audience won’t tell you. Homes sit on expansive clay soils that shift with the seasonal temperature swings, and slabs that have settled over twenty-something summers mean floors that aren’t perfectly level before a single cabinet goes on the wall. Building here runs through Clark County Building & Fire Prevention permits, and in HOA-governed communities the architectural review is a separate step. None of that is exotic. It’s just the ground your cabinets are actually being installed on.

Why the Cabinet Warranty Is the Real Cost Driver
The KraftMaid or Wellborn warranty you paid for at the showroom is voided the moment an installer skips the manufacturer’s required fastening pattern or hangs cabinets on a wall that wasn’t properly shimmed and leveled. Nobody tells you. You find out two years later when a door hinge fails, or a drawer front sits proud of the frame and won’t adjust back into line, and the claim gets denied because the install didn’t match the spec.
That’s the part most cabinet installation quotes leave out. The dollar figure you’re comparing isn’t just labor hours. It’s whether the work below is included:
- Wall stud location and blocking. Cabinets carrying plates, glassware, and a Silestone counter need to land on framing, not drywall anchors. In 1990s builder-grade framing, studs are not always on 16-inch centers. Sometimes there’s a doubled stud where you expect one, sometimes a gap. We find them before the first cabinet goes up.
- Level-line establishment. A laser level line is set across the whole run and every cabinet is shimmed to it, not to the floor. On a slab that’s settled unevenly, this is the step that keeps your countertop gaps even and your doors from racking.
- Fastening per manufacturer requirements. KraftMaid and Wellborn each publish a fastening schedule, and it’s specific about screw locations and cabinet-to-cabinet joining. Following it is what keeps the warranty intact.
- Door and drawer adjustment. Hinges and drawer slides get adjusted after installation, not before. That’s a step, and it takes time.
When a quote comes in well below the others on the same cabinet brand, one of those four steps is usually missing. Ask which one. If the answer isn’t specific, that’s your answer.
What Changes the Installation Cost in a Spring Valley Home
The wall your cabinets come off is not the wall your new ones go onto. In a Spring Valley stucco-on-wood-frame home, three conditions change the installation scope and the price with it.
Drywall condition behind the old cabinets
Twenty-year-old drywall behind removed uppers is often patched, water-stained, or has adhesive residue from a previous backsplash. If it needs repair before new cabinets hang, that’s real time and material. We quote it up front rather than surfacing it after the cabinets are ordered.
Stud spacing that isn’t what the drawings say
Builder-grade framing from the 1990s boom doesn’t always follow a clean grid. We map the wall before installation so blocking goes where it’s actually needed. This is the difference between a cabinet run that stays tight for a decade and one that pulls away at the seam within a year.
Soffit: structural or decorative
Plenty of Spring Valley kitchens have a soffit above the uppers. Some are framed and load-bearing-adjacent, some are just drywall boxes hiding ductwork or wiring. If you’re taking the soffit out to run cabinets to the ceiling, the price depends on what’s inside it. We look before we quote.

Cabinet Installation Pricing for Spring Valley
Here’s what the work actually runs in this market. These are install and project ranges, not cabinet material cost, which is quoted separately once you’ve picked your line.

| Project | Typical Range |
|---|---|
| Cabinet Installation (labor and hardware) | $4,000-$13,000 |
| Kitchen Island Installation | $3,000-$10,000 |
| Countertop Installation (Silestone, Cambria) | $2,000-$6,500 |
| Backsplash Installation | $800-$2,500 |
| Full Kitchen Remodel (cabinets, counters, finishes) | $14,000-$45,000 |
| Small Kitchen Remodel | $9,000-$20,000 |
Frameless or Face-Frame: The Cost Gap Most Quotes Skip
KraftMaid and Wellborn both build full-access (frameless) and face-frame cabinets, and the installation cost differs meaningfully between the two. Frameless boxes join cabinet-to-cabinet with a different fastening method and need the wall flatter, because there’s no face frame to absorb a small imperfection. Face-frame installs run faster on an uneven wall but need more hinge adjustment time afterward. If your quote doesn’t name which type you’re buying, ask. The number on the page should match the cabinet on the truck.
The Countertop Step That Has to Come After the Cabinets
Silestone and Cambria are templated, cut, and installed after the cabinets are fully level and secured. Not the same week. After. A template cut against cabinets that are still shifting will produce a countertop with visible gaps at the wall or an uneven seam at the sink.
This is why coordinating both scopes under one written price matters. When one contractor installs the cabinets and a separate one templates the countertops, nobody owns the gap at the cabinet-to-counter seam. Under one project, somebody does. That’s part of why we handle Kitchen Remodeling as a single coordinated scope, and why our Kitchen Remodeling in Spring Valley projects sequence cabinet install and counter template under one schedule. For a wider look at how the full job fits together, start at our home page.
The 365-Day Done Right Promise, Applied to Cabinets
Door alignment, drawer slide function, and hinge wear are the three most common post-installation issues on any cabinet job. A written 365-Day Done Right Promise means those adjustments are covered for a full year without a service-call negotiation. If a door racks or a slide starts catching, we make it right. On every project, the promise is stamped in writing.
Families in Spring Valley with kids and pets get a few more things on every visit: shoe covers at the door, drop cloths over the floors, quiet tools during nap and school hours where the schedule allows, and a photo of the clean-up before the crew leaves. The crew asks before moving anything. Our technicians have up to 21 years of experience, and we’re licensed and insured on every job. Cabinets from KraftMaid and Wellborn, fixtures from Kohler and Moen, counters from Silestone and Cambria: brands you can research by name, with warranties that travel with the finished project.
FAQs
Cabinet installation in Spring Valley runs $4,000 to $13,000 for labor and hardware, and a full kitchen remodel with new cabinets, countertops, and finishes lands between $14,000 and $45,000. Frameless cabinets, soffit removal, or drywall repair behind the old cabinets will push you toward the top of that range. Call (844) 320-4882 for an exact quote; estimates are free and the price is written before any work starts.
Refacing is usually cheaper, but it only makes sense when the existing boxes are square, solid, and mounted correctly to the wall. In Spring Valley’s 1990s and 2000s homes, box condition varies with settling and moisture, so we check the boxes before recommending reface. If the carcass is sound, refacing can save real money. If it isn’t, new cabinets are the cheaper path long-term. Call us and we’ll tell you which one you’re actually looking at.
Yes, and that’s the sequence we recommend. Cabinets must be fully level and secured before Silestone or Cambria comes out to template, and coordinating both under one written price means one party owns the seam at the counter edge. Splitting the two scopes between separate contractors is where gap-liability problems start.
Straight cabinet replacement usually doesn’t require a permit. Moving plumbing, electrical, or opening a wall does, and in Spring Valley that means a Clark County Building & Fire Prevention permit rather than a municipal one. Tell us what you’re planning and we’ll let you know which work needs the county involved before we start.
Get a Written Price Before Any Work Starts
Call (844) 320-4882 for a free estimate on your cabinet installation. We’ll walk the wall, find the studs, check the soffit, and give you a written price before the crew touches a thing. Live person answers, 24/7. Cabinets done to spec, warranty intact, promise stamped in writing.
Written by the team at Elmstead Remodeling Spring Valley, serving Spring Valley, NV.
What Our Customers Say
"Opened up our kitchen. They controlled the dust better than I thought possible, protected the floors, and left a photo of the cleaned space each day. Gentle on the house and on budget."
- Simon Albright"Kitchen and living room refresh. What stood out was the respect for our home, shoes off, floors covered, cleanup every evening. They checked with us before any change. Beautiful result."
- Dontae Willis"Two bathrooms done at once with kids and a dog in the house. They kept dust contained, were gentle with the pets, and left the place clean each day. Calm and careful."
- Paige Lindholm












